Индивидуальные уплотнительные кольца и уплотнительные прокладки из пищевого силикона

Индивидуальные уплотнительные кольца и уплотнительные прокладки из пищевого силикона is a made-to-order sealing component for assemblies that require a flexible silicone interface. Because this is a custom sealing item, no single fixed dimensional or material-property value applies to every project. The specification should be defined around the actual assembly and customer requirements.

The part can be developed around customer-supplied geometry or a reference sample. Final material grade, cross-section, inside and outside dimensions, hardness, tolerance, color and compliance requirements should be confirmed for each RFQ so the sealing ring matches the actual assembly.

Product Scope

• Custom silicone O-ring, sealing ring or gasket geometry for project-specific assemblies.
• Food-grade silicone requirement can be specified where the application calls for it.
• Dimensions and fit are controlled according to the mating structure rather than a single catalogue size.
• Suitable for prototype, replacement-part and production sourcing when a drawing or reference sample is available.

Information to Confirm Before Quotation

• Part drawing or target inside diameter, outside diameter and cross-section.
• Required silicone grade, hardness and color.
• Critical tolerances and the surfaces that form the sealing interface.
• Application environment and any project-specific compliance requirement.
• Prototype quantity and expected production volume.

Engineering Review

For custom sealing parts, the drawing and mating assembly should be reviewed together. This reduces the risk that a nominally correct ring is unsuitable for the actual installation interface. Prototype approval should be based on the finished assembly and the customer’s acceptance criteria.

Project-Specific Specification

This part is intended to be specified per project rather than treated as a fixed stock size. Critical requirements should be confirmed against the customer drawing and mating assembly. This also keeps the new product page accurate when different projects use different diameters, cross-sections, materials or acceptance criteria.

Рассмотрение запросов на предложение и чертежей

Send the available drawing, sample information and application requirements so the sealing-ring geometry and project specification can be evaluated before tooling or production release.